Build Diary - 1st June 2005
| Have neglected the rear axle strip down for a week now, had a pile of UPVC & Glass that had to be turned into a conservatory!. | |
|
Managed to clean both the grooved rear discs up to a serviceable condition tonight, removed the rear axle beam from the wishbones. The 2 long bolts that go through the top and bottom of the diff were a complete pain. Both were completely seized solid and needed 'persuading' out with a suitably large hammer! |
| The rear wishbones have previously been painted with what looks like hammerite, and it's all beginning to peel off, these will get the wire brush treatment next | |
|
Hopefully when I collect my donor kit from Tiger the diff rubber mount will be in a serviceable condition as the one on this rear axle is past its best. Of course if anyone out there has a spare that they aren't using I could put it to good use! |
