Build Diary - 17th September 2005
|
It's been a bit of a quiet month, spent most of it trying to get a decent brake pedal. I started off with 2 leaks from the rear T piece connector which really isn't easy to get to now everything is fitted. Eventually managed to stop that leaking and finally managed to bleed the brakes today... Going to have to get used to non servo assisted brakes! Fitted the Stoneguards to the rear arches today. |
|
This shows the n/s one in place and the exhaust can finally fitted to its bracket. |
|
I have also spent a few evenings making the dashboard. I have all the cut outs for the instruments now. (52mm for the oil, temp, and fuel and 80mm for the speedo and tacho) The 4 std Tiger switches will be fitted in the lower section of the dash, with the Honda S2000 push button start & the cat 2 immobiliser touch key fitted between the speedo and tacho. I am waiting for some foam to arrive so I cant do anymore to that... |
|
Rear number plate lamp fitted, and edging trim fitted around the spare wheel carrier to keep Mr SVA happy. |
|
Drivers seat bolted in place. I went for the adjustable drivers seat which makes the fitting a lot easier as it sits on runners. 4 8mm holes and the seat drops in place. |
