Build Diary - 22nd January 2006
|
Finally fitted the interior. The side panels were screwed in to the top chassis rail |
|
The carpets I got from Chester Sports Cars had the tunnel top piece attached to the 2 bits of carpet that cover the sides of the transmission tunnel making things a lot neater. The 2 seat back carpet pieces were glued in place, and the seats hold the 2 floor carpets in place. |
|
I made to panels from plywood and stapled the carpet to them for the rear shelf and the back of the rear shelf. The fire extinguisher bracket screws through the back panel and holds it in place. The drivers adjustable seat was then bolted in. The passenger seat was held in place by some 50mm coach bolts fitted from underneath and through the chassis rails. |
